24kW industrial immersion heater features:
- Immersed length of 1100mm or 43″.
- 150mm or 6″ inactive or cold end.
- 10w/cm² or 65w/in² watt density,
- Alloy IP67 terminal enclosures.
- Terminal box dimensions – 120mm diameter x 105mm height.
- 2.25″BSP screwplug,
- 3 x Incoloy 800 (“a superior stainless steel”) 8mm diameter 156” elements.
- Elements brazed into screwplug.
- Complete with Tig welded incolloy 800 11″ thermowell. This will house any of our 11″ thermostats.
On our stock 24kW industrial immersion heater we use 6″ cold or inactive ends by default in case our customers need to fit the heater vertically, allowing a little leeway for level drop within the tank. This extended cold end also prevents any issues of tunnel heating, which can be problematic if deep weld bosses are used. With a 2″ cold, an inch is lost into the screwplug, so only the first inch is really unheated.
[ngg src=”galleries” ids=”16″ display=”basic_thumbnail” show_slideshow_link=”0″]
Call Tim on 07864 931524 to discuss your 24kW industrial immersion heater needs. There is no substitiute for a telephone conversation, perhaps supplemented with a photograph or two to tim@nullprocessheatingservices.com. Everybody’s applications is different, and we take a pride in getting everything right first time. The best way to achieve this is through a two way discussion. We look forward to helping you address your requirements.
A full description and explanation of the componet parts of a screwed immersion heater is available here on our blog. Also available is information about how best to choose an immersion heater for water, oil, and breweries. Also available is an informational entry about the process we go through when designing immersion heaters, generally.
Other Immersion Heater Ranges.
- Heavy Duty Industrial Immersion Heater – PIH Range (4.5kW to 24kW)
- Calorifier and Brewery Immersion Heater – PCAB Range (3kW to 24kW)
- Oil Immersion Heater Range – POIL Range (750W–4.5kW)”